Codes This Page Will Cover:
- B2200 No Communication to TV Module (No Fitting of TV)
- B2201 No Communication With Traffic MasterModule
- B2202 No Communication to VICS Module (No Fitting of VICS)
Who Has the Lowest Price?
Some service centers will give you an online estimate to compare. Why drive around Town!?
What Is the B2200 Code?
Symptoms
Causes
Seriousness
Can I Still Drive?
Diagnose
Difficulty of Inspecting
Get Additional Help
Error code B2200 is an extension of the OBD II code B. Codes beginning with the letter B indicate a problem with your vehicle’s A/C systems and airbags. A B2 code is manufacturer-specific and indicates that service is required. However, a B2200 code is considered generic and usually applies to all makes and models, brandishing different definitions. All B codes are commonly displayed as BXXXX, with the third numeral in the code sequence signifying where the OBD II system has indicated a problem. The number two indicates a complication with the vehicle’s injector circuit’s fuel and air metering. The last two digits (0) indicate the fault description.
About Error Code B2200
Error code B2200 indicates that there is no communication to the TV module. This could be the result of a damaged or faulty TV module, the harness for the module is open or shorted, or the module has a poor electrical connection. The code could also be the result of a faulty body control module (BCM). The BCM is responsible for monitoring your vehicle’s TV module. The BCM will set this OBD II code anytime the TV module is not up to factory specifications, thus alerting the driver that something is wrong.
What Are the Symptoms of a B2200 Code?
The only symptom associated with error code B2200 is the illumination of your vehicle’s check engine light. The vehicle will usually operate at normal capacity with no additional effects on its functionality.
What Are Some Causes of a B2200 Code?
Many possible causes could contribute to the display of a B2200 error code. These causes typically include a faulty TV module, an open or shorted TV harness, poor electrical connection to the TV module circuit, or a faulty BCM.
How Serious Is the B2200 Code?
It’s best to take your car to a service center in your area for repairs whenever experiencing a code designated B2XXX. There could be monumental mechanical issues if there is a short in the system if the issue causing this error code is a direct result of faulty electrical wiring.
Can I Still Drive with a B2200 Code?
While it is safe to continue driving your vehicle with error code B2200 present, you should still take your car in for repairs rather than driving it often with this code present.
How Easy Is It to Diagnose a B2200 Code?
If you lack expertise, visually inspecting the TV module’s wiring harness and all of the connectors associated with it can be a daunting task. In addition, checking for any damaged components or connector pins that may be broken, pushed out, bent, or corroded can be dangerous. Making the necessary replacements or repairs is best left to professional technicians.
How Difficult Is It to Inspect a B2200 Code?
Repairing your vehicle when a B2200 error code is present is often very complex for anyone who isn’t a professional mechanic. Therefore, it is best to take your vehicle to a nearby service center for repairs. You may think you are saving yourself some money by doing the repairs on your own, but if you can catch the problem early enough, the cost of repairs is relatively inexpensive.
Need Additional Help with Your B2200 Code?
You could end up doing more harm than good if you are unfamiliar with your vehicle’s electrical components. You should take your car in for diagnostics and repairs at a local service center. You can find a reliable service center near you by checking out our service center location list for mechanics in your area.
B2200 Q&A
Common Error Codes
Browse All OBD-II Codes
Get Recall Alerts
All recalls are considered serious. Stay safe. Take care of any recalls ASAP. The good news? Recall repairs are free when performed at a local dealer.