A Fair Repair Range for this repair is not yet available.
Recommended by HUMMER
Change engine oil and filter
Check air cleaner
Check axles for leaks and damage
Check ball joints for wear
Check CDR valve for oil saturation
Check CTIS operation. Verify that system inflates/ deflates tires
Check fluid levels and condition for power steering pump, cooling system (reservoir and surge tank), brakes, transmission, transfer case, geared hubs, and axles.
Check tire wear and condition
Check torque of wheel half nuts and lug nuts
Check winch operation and cable condition (if equipped)
Inspect condition of control arms, springs, and shock absorbers
Inspect condition of engine mounts and insulators
Inspect condition of geared hub and axle vent lines
Inspect condition of transmission and transfer case vent lines
Inspect fuel filter and drain/clean if necessary
Inspect geared hubs for leaking seals or damage
Inspect service brakes and parking brake
Inspect transmission/ transfer case shift linkage for wear, binding, and distortion
Inspect U-joints for wear or missing/damaged grease fittings
Lubricate all grease fittings and body lubrication points
Test drive vehicle and complete a functional check of all systems
63,000 Mile Service
HUMMER Maintenance Near Me
Near Hallock, MN
56728
View:
2003 H1 63,000 Miles Q&A
HUMMER Maintenance Pricing & Schedules
Pricing for Common 2003 HUMMER H1 Repairs & Services
This usually happens with older/less-common vehicles or if the manufacturer no longer makes vehicles. And certain repairs don’t apply to every make & model.